BHV Header
Navigation
Callisto-F
spacer            
    Callisto-F    
spacer
 

A fully-featured low cost SDI/analogue switcher

 

Other features include
spacer
Full specification 270Mbit SDI video switcher; 10-bit digital precision throughout
spacer
Simultaneous programme and preview SDI and analogue composite outputs
spacer
Single-layer DSK with key/fill inputs and programme clean feed
spacer
Auto/manual dissolves and wipes with auto fade to black
spacer
Dual framestore synchronisers;
genlock SPG
spacer
'Hot-Cut' live programme bus cut feature
spacer
  Industry-standard editor and automation protocol
spacer
  GPI and RS422 remote ports; source ident
spacer
  Analogue composite inputs option
spacer
 
   
Contact us to find out more.
spacer
spacerspacer
spacer spacer

 

Download the
Callisto product sheet

 

Callisto is a broadcast specification (SMPTE-259M) 270 Mbit video switcher with DSK (downstream keyer) designed for studio, edit suite and transmission applications. Callisto can handle fully asynchronous (unlocked) inputs in a mixed signal format (SDI and analogue) environment.

The programme and preview outputs are available as both SDI and analogue composite with 10-bit processing throughout. There are two SDI auxiliary switched outputs for monitoring and routing, and switchers fitted with the composite input option also have a separate composite switched output. The incoming sources can be asynchronous as Callisto features dual channel framestore synchronisers. The switcher will operate in stand-alone mode, or may be genlocked to an external reference. A line store (minimum delay) mode is also available via the set-up menu.

Operationally, Callisto works in conventional programme/preview bus mode. Installed functions include manual and auto wipe (multiple patterns with normal/reverse, colour border and soft edge), manual and auto dissolve, and auto fade to black. A new feature is the Hot-Cut function, which allows the operator to make cuts directly on the programme bus without the freeze-frame commonly associated with asynchronous switchers. Callisto is dual standard 525/625 and offers 4:3 or 16:9 (letterbox) blanking. In conjunction with the Callisto-C control panel, the extensive menus allow the user to tailor the operational modes to suit individual requirements. An internal TSG provides EBU bars and other test `signals.

Callisto also features a DSK with fully synchronising SDI inputs for external 'Key' and 'Fill' and a 'clean feed' (pre-DSK) programme output. Optional analogue composite decoders allow signal acquisition in mixed format environments (SDI digital and analogue) without compromising any of the unit's other features. This allows the switcher to be used efficiently in today's transitional environment while retaining the necessary specifications and features for the all-digital world of tomorrow. The shift function allows the user to switch formats on any input channel between transitions. Callisto can be controlled via industry standard editor protocols such as GVG, GVG-M2100 and Sony DFS, and has a full complement of assignable (take/ftb/source select) GPI functions and GPI high-current output drivers.

 
Inputs SDI component x 8
  SDI DSK key/fill
  Optional analogue composite x 6 or x 8
  Genlock composite loop-through (N.B. DSK SDI inputs can also be configured as analogue programme inputs 7 and 8)
spacer
Outputs Programme SDI and composite
  Preview SDI/Clean feed and composite
  Separately switched Auxiliary SDI input monitoring x 2
  Composite source monitoring
  Adjustable (±127 lines) composite sync
spacer
Dimensions RU x 484mm (19”) wide x 250mm (10”) deep
spacer
Power requirements 100-263 V a.c. 30W
spacer spacer  
2 Callisto Fs
    Callisto-F - Front and Back
spacer
 
             
  Grey Line  
  © BHV Broadcast 2011 All Rights Reserved  
spacer spacer spacer spacer spacer spacer spacer

 

 

 

 

 

spacer

 

 

 

 

 

 

spacer

Home Case Studies Services About Us Contact